Troubleshooting
Dead outlets, flickering lights, tripping breakers and partial power losses traced to the cause.
ELECTRICIAN · WALNUT CREEKElectrician
Electrician
in Walnut Creek, CA.
Licensed electrician in Walnut Creek for troubleshooting, dedicated circuits, lighting, 240-volt outlets and older wiring in homes and condos.
Serving Northgate, Rancho San Miguel, Parkmead, Walnut Heights, Larkey Park and Rossmoor and the rest of Walnut Creek. Share your address to confirm availability.
4.8 rating · 515+ reviewsHVAC & electrical, one teamPermits handledCA Lic #1081990
Electrical repairs
and upgrades.
Licensed electricians for troubleshooting, repairs and small projects in houses, condos and small businesses.
Outlets, switches and GFCI
Replacing worn devices, adding GFCI and AFCI protection, and new circuits.
Lighting and ceiling fans
Recessed lights, fixtures and ceiling fans, including older homes without boxes rated for fans.
Old wiring
Knob-and-tube and ungrounded circuits assessed and updated.
Dedicated circuits
Circuits for kitchens, home offices, hot tubs, heat pumps and appliances.
Inspections
Electrical checks for buyers, sellers and insurance.
WALNUT CREEK DETAILSElectrical work in
Electrical work in
Walnut Creek.
Walnut Creek housing runs from postwar ranch homes in Parkmead and Larkey Park to Eichlers in Rancho San Miguel and Rossmoor co-ops and condos. Each has different wiring limits.
01
Postwar homes
Two-prong outlets, few kitchen circuits and aging breakers are common. HAXX adds grounding and dedicated circuits for modern appliances.
02
Eichlers
With open beams and no attic, new wire runs take planning. HAXX plans circuits and lighting around the structure.
03
Condos and co-ops
Work in shared buildings may need association approval. HAXX provides the scope and license details you need.
What customers say
about HAXX.
Rated 4.8 across 515+ reviews on Housecall Pro, Google and Facebook. Read more reviews.
★★★★★
“I purchased a couple of ceiling fans and was reluctant due to how old my house was with old wiring so I wanted someone professional and trustworthy. They have been both!”
★★★★★
“Prompt and professional - they helped run a new thermostat wire through a wall and crawl space.”
★★★★★
“I told him that the lights in my living room had been flickering for a while and asked if he could take a quick look. Instead of brushing it off, he immediately went to the main panel, asked a few questions, and then checked my subpanel in the garage.”
HOW A REPAIR VISIT WORKSFrom the first call
From the first call
to a working system.
01
Tell us the symptom
Brand, model and what it is doing. Photos of the label or error code help.
02
Diagnose on site
The technician tests the system and finds the cause, not just the symptom.
03
Approve the price
You see the repair price before work starts, and the options if a repair is not worth it.
04
Fix and test
The repair is completed and tested, or scheduled once the part arrives.
HAXX ON SITEReal work.
Real work.
Real homes and businesses.
A closer look at recent electrical work by HAXX.
THE PEOPLE BEHIND THE WORKHands-on work.
Hands-on work.
A real look inside.
On site during a commercial VAV box repair: access above a suspended ceiling, equipment and the work in progress.
Explore recent projectsRecent Projects
Subpanel Installation
Subpanel installation.
Subpanel and New Circuits
Subpanel and new circuits.
Basement Subpanel and Circuits
Basement subpanel and circuits.
NEMA 14-50 Outlet Installation
Nema 14-50 outlet installation.
Commercial Circuit Installation
Commercial circuit installation.
Server Room Subpanels
Server room subpanels.
Chandelier Installation
Chandelier installation.
New Light Installation
New light installation.
GOOD TO KNOW
Electrician in Walnut Creek: questions, answered.
Who licenses the electricians HAXX sends to Walnut Creek?
The State of California, under contractor license #1081990, which carries both the C-10 electrical and C-20 HVAC classifications.
Do you pull electrical permits in Walnut Creek?
Yes. When the work requires one, HAXX applies through the city's Online Permit Portal and attends the inspection.
Why does my breaker keep tripping?
An overloaded circuit, a short or a failing device. Do not keep resetting it. HAXX tests the circuit and fixes the cause.
Do you work on older homes?
Yes. HAXX updates knob-and-tube, ungrounded and aluminum wiring and adds protection where code requires it.
LET’S TALK ABOUT YOUR PROPERTYTell us what you need.
Tell us what you need.
We’ll start there.
Share the property, equipment and questions you have in mind.
(408) 901-8315
Call HAXX to discuss your property and scheduling.