Panel capacity check
A load check before the install tells you which charger size your service can carry.
EV CHARGER INSTALLATION · GILROYEV Charger Installation
EV Charger Installation
in Gilroy, CA.
Level 2 EV charger installation in Gilroy, with the load calculation, single line diagram and site plan the City asks for on every residential permit.
Serving Downtown Gilroy, Eagle Ridge, Glen Loma Ranch, Lions Creek, and the East Side and West Side and the rest of Gilroy. Share your address to confirm availability.
4.8 rating · 515+ reviewsHVAC & electrical, one teamPermits handledCA Lic #1081990
Level 2 charging,
installed to code.
Hardwired wall chargers and 240-volt outlets for Tesla, Rivian, Ford, Hyundai and other EVs. Every install starts with a check of your panel capacity.
Tesla Wall Connector and others
Tesla, ChargePoint, Emporia, Wallbox and other Level 2 chargers, plus NEMA 14-50 outlets.
Garage, driveway or carport
Circuit routing planned for a clean install, including trenching for detached garages when needed.
Two-EV households
Power-sharing between two chargers so both cars charge without a service upgrade.
Load management
Chargers that throttle when the house is busy, which can avoid a panel upgrade.
Permit and inspection
HAXX pulls the electrical permit and meets the inspector.
GILROY DETAILSEV charging
EV charging
in Gilroy.
Gilroy's residential EV charger handout lists what a permit needs: load calculations, a single line diagram, a site plan, panel photos and the manufacturer's instructions.
01
Paperwork done
HAXX prepares the load calculation and single line diagram showing conductor sizes, breaker, conduit and charger model.
02
Code details
Chargers must be listed, protected from vehicle impact and on full-space breakers. Units over 60 amps need a lockable disconnect.
03
Inspection
The City inspects after wiring and charger installation, with the contractor present. HAXX attends.
What customers say
about HAXX.
Rated 4.8 across 515+ reviews on Housecall Pro, Google and Facebook. Read more reviews.
★★★★★
“The technician from Haxx immediately pointed out multiple violations of the National Electrical Code and explained that the wiring was overheating and could potentially become a fire hazard. They offered to redo the installation the correct way, pulled the proper permit, and installed the EV charger safely and professionally. The city inspection passed without any issues.”
★★★★★
“Recently, my dishwasher stopped working, and they discovered it was actually an outlet issue. Not only did they diagnose it quickly, but they also fixed the outlet—saving me from calling an electrician. Reliable, professional, and skilled at handling both appliances and electrical issues.”
★★★★★
“I purchased a couple of ceiling fans and was reluctant due to how old my house was with old wiring so I wanted someone professional and trustworthy. They have been both!”
A CLEAR NEXT STEPFrom your first question
From your first question
to a considered plan.
01
Share your starting point
Existing equipment, home layout and what you want to improve.
02
Review the property
Sizing, airflow, equipment placement and electrical needs.
03
Compare the scope
Options, exclusions, permit requirements and any eligible incentives.
04
Plan installation
Confirm equipment, scheduling and handover details with HAXX.
HAXX ON SITEReal work.
Real work.
Real homes and businesses.
A closer look at recent electrical work by HAXX.
THE PEOPLE BEHIND THE WORKHands-on work.
Hands-on work.
A real look inside.
On site during a commercial VAV box repair: access above a suspended ceiling, equipment and the work in progress.
Explore recent projectsRecent Projects
EV Charger Installation
Ev charger installation.
Tesla Wall Connector Installation
Tesla wall connector installation.
Emporia EV Charger Circuit
Emporia ev charger circuit.
SPAN Drive EV Charger Installation
Span drive ev charger installation.
NEMA 14-50 Outlet Installation
Nema 14-50 outlet installation.
Main Panel Installation
Main panel installation.
Main Panel Upgrade
Main panel upgrade.
Main Panel Replacement
Main panel replacement.
GOOD TO KNOW
EV Charger Installation in Gilroy: questions, answered.
Do I need a permit for a Level 2 charger in Gilroy?
Yes. A Level 2 charger needs a 240-volt circuit, an electrical permit and an inspection in Gilroy.
What happens at the EV charger inspection?
The inspector checks the charger, breaker and connections, including torque on EV breakers, along with clearances and labeling. Smoke and CO alarm self-certification is also required.
How fast will a Level 2 charger charge my car?
Most homes install a 40 to 60 amp circuit, which adds roughly 25 to 45 miles of range per hour depending on the car. Panel capacity sets the limit.
Do I need a panel upgrade for an EV charger?
Often not. A load calculation and a right-sized circuit or load-management charger can avoid it.
LET’S TALK ABOUT YOUR PROPERTYTell us what you need.
Tell us what you need.
We’ll start there.
Share the property, equipment and questions you have in mind.
(408) 901-8315
Call HAXX to discuss your property and scheduling.