Load calculation
A written load calculation of existing and planned appliances, so you know whether you need more capacity at all.
ELECTRICAL PANEL UPGRADE · NEWARKElectrical Panel Upgrade
Electrical Panel Upgrade
in Newark, CA.
Need more capacity for a heat pump, EV charger or induction range in Newark? HAXX replaces and upgrades panels, with the permit and PG&E coordination.
Serving Mayhews Landing, the Lakes, the Waterfords, Bayshores, Newpark Village and Central Newark and the rest of Newark. Share your address to confirm availability.
4.8 rating · 515+ reviewsHVAC & electrical, one teamPermits handledCA Lic #1081990
Panel and service
upgrades.
Most panel projects start with a heat pump, EV charger, induction range or remodel. HAXX begins with your real electrical load and only upgrades what the numbers require.
Panel replacement
Replacing outdated, full or recalled panels, including Zinsco and Federal Pacific.
Service upgrade to 200 A
Coordinating the utility, meter and service equipment when the home needs more power from the street.
Subpanels
Adding a subpanel for a garage, ADU or new circuits when the main panel is out of space.
Load management
Smart panels and circuit-sharing devices that can avoid a service upgrade in some homes.
Permits and utility coordination
HAXX handles the permit, the inspection and the PG&E work order.
NEWARK DETAILSPanel upgrades
Panel upgrades
in Newark.
Homes built in Newark's 1950s to 1970s boom often still have their original 100-amp or smaller service. New electric loads push many of them to the limit.
01
Load math first
A NEC load calculation shows whether you need a bigger service or just better use of the one you have.
02
Panels worth replacing
Zinsco, Federal Pacific and crowded split-bus panels turn up in older Newark houses and are worth retiring.
03
No-plans permit
Newark lists electrical service upgrades among projects that need a permit but no plans. HAXX files it and coordinates the PG&E shutoff.
What customers say
about HAXX.
Rated 4.8 across 515+ reviews on Housecall Pro, Google and Facebook. Read more reviews.
★★★★★
“I purchased a couple of ceiling fans and was reluctant due to how old my house was with old wiring so I wanted someone professional and trustworthy. They have been both!”
★★★★★
“Prompt and professional - they helped run a new thermostat wire through a wall and crawl space.”
★★★★★
“I told him that the lights in my living room had been flickering for a while and asked if he could take a quick look. Instead of brushing it off, he immediately went to the main panel, asked a few questions, and then checked my subpanel in the garage.”
A CLEAR NEXT STEPFrom your first question
From your first question
to a considered plan.
01
Share your starting point
Existing equipment, home layout and what you want to improve.
02
Review the property
Sizing, airflow, equipment placement and electrical needs.
03
Compare the scope
Options, exclusions, permit requirements and any eligible incentives.
04
Plan installation
Confirm equipment, scheduling and handover details with HAXX.
HAXX ON SITEReal work.
Real work.
Real homes and businesses.
A closer look at recent electrical work by HAXX.
THE PEOPLE BEHIND THE WORKHands-on work.
Hands-on work.
A real look inside.
On site during a commercial VAV box repair: access above a suspended ceiling, equipment and the work in progress.
Explore recent projectsRecent Projects
Main Panel Installation
Main panel installation.
Main Panel Upgrade
Main panel upgrade.
Main Panel Replacement
Main panel replacement.
SPAN Smart Panel Installation
Span smart panel installation.
Subpanel Installation
Subpanel installation.
Subpanel and New Circuits
Subpanel and new circuits.
Zinsco Subpanel Replacement
Zinsco subpanel replacement.
Basement Subpanel and Circuits
Basement subpanel and circuits.
GOOD TO KNOW
Electrical Panel Upgrade in Newark: questions, answered.
Do I need a permit for a panel upgrade in Newark?
Yes. Newark Building Inspection issues the permit, and a service upgrade does not require plans. HAXX applies and schedules the inspection.
How long will the power be off?
Usually one working day, depending on PG&E scheduling for the disconnect and reconnect.
Do I need 200 amps?
Not always. A load calculation shows whether your current service can carry the new appliances, sometimes with load management. HAXX recommends an upgrade only when the numbers require it.
How long does a panel upgrade take?
The panel swap itself is usually one day. Permits and utility scheduling for service upgrades can add several weeks, so plan early.
LET’S TALK ABOUT YOUR PROPERTYTell us what you need.
Tell us what you need.
We’ll start there.
Share the property, equipment and questions you have in mind.
(408) 901-8315
Call HAXX to discuss your property and scheduling.